You May Ask
Frequently Asked Question
They are steel shipping containers manufactured to a very high specification using high tensile Corten (anti-corrosion) steel; they are not only strong and very secure, but also capable of surviving in extreme conditions. These design qualities ensure our containers are ideal to use for storage.
Approximate Empty Tare Weight:
20 foot storage container: 2.25 tonnes or 2200kg
40 foot storage container: 4 tonnes or 3950kg
20 foot storage container: 2.25 tonnes or 2200kg
40 foot storage container: 4 tonnes or 3950kg
Standard ISO freight containers are designed to withstand the rigors of marine transportation and are constructed with a high tensile steel rigid framework, with corrugated steel walls and doors. The floors are 28mm marine ply that is both rot and vermin proof, mounted on steel cross members. Standard containers have double doors fitted at one end, retained by 4 full height locking bars all fitted with lockable handles. Additionally we also fit a high security lock box.
Storage containers are very secure and virtually vandal proof. As standard, there is provision for the fitment of padlocks to the door handles. For extra security we recommend a steel ‘Lock Box’ to be fitted to the storage container doors. Our ‘Lock Box’ is designed to encase a high security container padlock and protect the lock from being tampered with. The padlocks we supply fit into our lock boxes with ease. They are supplied with numbered keys and we also offer a replacement key service on request.
We use ‘Hiab’ trucks fitted with their own crane to deliver the containers. The trucks require a delivery site with ample access and solid ground. The on-board crane sets down the storage container from the side of the vehicle and therefore we need approximately a 25ft width to facilitate the offloading. Additionally, there must be no overhead cables or overhanging trees in the way. The delivery truck will be a maximum size of approximately either 34ft or 60ft long by 8ft 6″ wide. With the storage container on the vehicle the height will be around 15ft and when the crane is extended to its full height this will be approximately 25ft. If you are not sure about your site, then simply send us a drawing with dimensions and we will check that the delivery is feasible. Within reason we can get a storage container almost anywhere. All our storage containers have specially designed corner castings for lifting and positioning, and the majority of 8ft, 10ft and 20ft containers also have forklift truck pockets. If you have any doubts call us and we’ll arrange for an expert to visit your site and carry out a survey.
Storage containers are non-permanent so in most cases not. However if the storage container is going to be in a residential area, near a road junction, or likely to cause complaints from neighbours, we recommend you check with your local planning authorities.
Storage containers are self-supporting and do not need any special foundations, however for the doors to operate properly they should be placed on level ground. Our drivers can help with the positioning, however, it is the customer’s responsibility to ensure the ground is adequately prepared and that you have the materials to make the storage container sit . Examples of suitable materials are railway sleepers underneath the storage container, or a concrete paving block under each corner. Once level you can load up to 30 tonnes in a container without problem.
It may be possible to buy your container at a later date. Please contact us for details.
Yes, we frequently buy back containers from clients. The price will be subject to the condition and age of the container and any transport costs associated with collection.
There is a general misconception that condensation is an issue. The basic rule is that if you don’t load damp materials there is not a problem. We guarantee all our equipment as being watertight and additionally we equip our storage containers with ventilators that allow the container to breathe. However if you are using the storage container to store sensitive goods we recommend you opt for a high vented container. These have 10 ventilators fitted (most companies only fit 2) and this ensures condensation can be easily avoided. By using this design, many of our customer use our containers for storing furniture, paper archives and electrical goods. If you have major concerns we can also provide an anti-humidity product that hangs inside the container to ensure it is kept dry.